SFC30

SFC30
Scag SFC30 30 Inch Mower
Play Video
FULLY FABRICATED AND WELDED STEEL CUTTER DECK

Military-Grade Steel - Deck

Extra-strong fabricated (non-stamped) steel cutter deck features 14-gauge, grade 100 Military-Grade steel deck shell, 12-gauge spindle reinforcement plate and ¼” side reinforcement bar, all while delivering the quality-of-cut you’d expect from a Scag mower.

 
 
SFC30 Military Grade Steel Deck
FULLY FABRICATED AND WELDED STEEL FRAME

Military-Grade Steel - Frame

Extra-strong, fully fabricated steel frame (not cast aluminum). The Military-Grade steel spec used on the SFC30 is over 200% stronger than standard drawing steel found in common stamped frames and decks in this machine class.

 
 
SFC30 Steel Frame
SINGLE POINT HEIGHT-OF-CUT ADJUSTMENT

Fine-Tuned and Simple

Adjust the height-of-cut from a single location rather than at all four corners or having to adjust the front and back tires separately. Refine your height settings with adjustments from 1.5” to 5” in .25” increments.

 
 
SFC30 Single Point Height-of-Cut Adjustment
OFFSET BLADE SET UP

Simplified Deck Drive System

An offset blade design is less complex and easier to maintain than traditional timed deck setups. This more robust system results in potential belt replacements taking less than half the amount of time to repair/replace compared to timed deck systems. Image shown with bagging baffle.

 
 
SCAG LEVEL QUALITY-OF-CUT

Unmatched Performance

The large cutting chamber helps process more grass while being able to eat through wet and lush spring time grasses more efficiently. Cutter deck discharge opening is oversized for its class.

 
 
SFC30 Oversized Discharge Opening
OPERATOR CONTROL PANEL

Ergonomic Controls

Angles of operator station controls match the natural angles of your outstretched hands. All controls are within easy reach: blade brake engagement, drive engagement, recoil start, throttle/choke, hour meter and park brake.

 
 
SFC30 Ergonomic Controls
OVERSIZED ADJUSTABLE CONTROLS

Achieve Maximum Comfort

Oversized handles feature internally routed cables to protect from potential snags. Handle features tool-free adjustment, up and down, to fit operator height preference. Additional vertical adjustment setting for transportation or storage.

 
 
SFC30 Adjustable Handles
DISCHARGE – MULCH – BAG

3-in-1 versatility

The SFC30 delivers the ability to discharge, mulch or bag. All options come as standard equipment, allowing the operator to change on the fly as needed. Discharge: discharge chute – Mulch: deck plug and mulch plate – Bag: bagging baffle, mulch plate and fabric bag

 
 
SFC30 3-in-1 Versatility
POWERFUL TRANSMISSION & ENGINE COMBO

Maximum power for tough cuts

The combination of a GT MV702 best-in-class transmission and Kohler CV224 engine bring the power for optimum performance in the toughest of cutting conditions.

 
 
SFC30 Powerful Engine
  • Engine & Deck Combinations
  • Product Dimensions
  • Specifications
ModelDescriptionMSRP
SFC30-7CV30" fully fabricated steel cutter deck, Kohler 224CV engine – recoil-start engine$2,620
Product DimensionsSFC30
Length - Transport (handles in upright transport position)41"
Length - Minimum (handles in highest operating position)66"
Length - Max (handles in lowest operating position)73.5"
Tracking Width28.75"
Width (w/ discharge chute)36.75"
Width (w/ discharge block off plate)31.5"
Height - Lowest Operating 36.75"
Height - Max Operating 45.25"
Height - w/ Handle Bar in Storage Position57.5"
Operating Weight - Bagging220 lbs.
Operating Weight - Mulching214 lbs.
Operating Weight - Discharging213 lbs.
 SpecificationSFC30
GeneralTotal Fuel Capacity1 gallon
Rear Tires10.5" x 3" rubber tire w/ glass-filled polypropylene wheel
Front Tires9” x 2.25” rubber tire w/ glass-filled polypropylene wheel
Drive SystemDrive System TypeGT MV 702 Transmission
Forward Ground SpeedUp to 4 mph
Parking BrakeHand lever
DeckCutting Widths30"
TypeExtra-strong, fully fabricated and welded steel cutter deck. Offset blade, non-timed deck setup.
Cutting Height1.5" to 5" in .25" increments.
Blade TypeOptimized for maximum performance whether discharging, mulching or bagging
Deck LiftHand lever. Single-point adjustment.
Construction14-gauge, grade 100, Military Grade steel deck shell with 12-gauge spindle reinforcement plate. ¼” trim side reinforcement bar offers extra protection against impacts.
SpindlesAluminum housing with sealed ball bearings.
Blade EngagementBlade brake clutch allows operator to disengage cutter blades without shutting off the machine.
Discharge, Mulch, BagStandard
Bag Capacity2.5 Bushels
Scag SFC30 30 Inch Mower

Find a Dealer

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Optio, neque qui velit. Magni dolorum quidem ipsam eligendi, totam, facilis laudantium cum accusamus ullam voluptatibus commodi numquam, error, est. Ea, consequatur.

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Optio, neque qui velit. Magni dolorum quidem ipsam eligendi, totam, facilis laudantium cum accusamus ullam voluptatibus commodi numquam, error, est. Ea, consequatur.

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Optio, neque qui velit. Magni dolorum quidem ipsam eligendi, totam, facilis laudantium cum accusamus ullam voluptatibus commodi numquam, error, est. Ea, consequatur.