   
|
Scag Cutter Blade Recommendation Chart
Scag cutter decks are designed to provide
the best quality-of-cut in the industry. However, varying
conditions may require the use of different cutter blades
to acheive optimal results. Below are the various blade
types offered by Scag to meet all your cutting demands.
Remember, only Genuine Scag Performance
Parts are guaranteed
to work in harmony with your Scag mower to ensure consistent,
top-quality performance. Scag's Marbain™ cutter
blades feature the Scag logo stamped
onto the blade itself.
Don't settle for cheap substitutes. Accept nothing less
than Genuine Scag Performance Parts!
Contact your
local Scag
dealer for more specific recommendations, and to
order new cutter blades for your mower.*
|
| Low-Lift Blade |
|
|
Use a Low Lift Blade when
the conditions are dry, the region is
experiencing a drought, or when performing seasonal scalping.
When conditions like this are evident, lift created by
the cutter blades can be reduced.
The Low Lift Blade will also help reduce cutter deck blowout
during the conditions stated above. |
| |
| Sand Blade |
|
|
Use a Sand Blade in sandy
soil areas when the conditions are dry, the region is experiencing
a drought, or when performing seasonal scalping. When conditions
like this are evident, lift created by the cutter blades
can be reduced, decreasing the abrasion wear to the cutter
blades and deck caused by sand. The Sand Blade will help
reduce cutter deck blowout and abrasion wear during the
conditions stated above. The Sand Blades are made with
1/4" thick material
and have slightly less lift than the Low Lift Blade.
|
| |
| Standard Blade |
|
|
Use a Standard Blade for the best overall
cutting performance in most conditions. The Standard Blade
will create optimum lift that is required during normal
cutting conditions resulting in a clean, even appearance.
|
| |
| High-Lift Blade |
|
|
Use a High Lift Blade when the conditions
are extremely wet or using a grass catcher on the Freedom
Z. The High Lift Blades will create greater lift that may
be needed in difficult cutting conditions. Additional deck
cleaning may be required when using High Lift Blades.
|
| |
| Eliminator Blade |
|
|
| “Eliminator” mulching
blades are designed for use with a mulching (discharge block-off)
plate or with a complete mulching system, such as the Hurricane
Plus Mulch System. These blades feature a high lift, “double-cut” edge
for quick, thorough shredding of grass clippings and debris.
Vital nutrients are returned to the soil. |
*Not all blade types are available for all mower models.
Consult your Scag dealer for specific information.
|
|
|
